[1] EN ISO. 14971:2007, Medical devices-Application of risk management to medical devices[S/OL].(2010-11-02)[2013-07-05].http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm.csnumber=31550. [2] 武俊华.医疗器械风险分析方法探讨[J].法规与标准,2001,7(1):8-11. [3] 王健康.风险管理原理与实务操作[M].北京:电子工业出版社,2008:20-25. [4] 尉可道.风险管理对医疗器械的应用[J].中国医学装备,2004,1(1):14-17. [5] 刘华芬,王晓红,向晋涛,等.与起搏器有关的并发症案例报道10年回顾分析[J].中国心脏起搏与心电生理杂志,2007,21(4):370-373. [6] 盛洪涛,陈爱民,陈建峰,等.99例植入式心脏起搏器可疑不良事件报告分析[J].中国药物警戒,2009,6(2):102-105. [7] 中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员.YY/T0492-2004,植入式心脏起搏器电极导管[S].北京:中国标准出版社,2004. [8] 李雪原,李铁玲.加强医疗器械管理降低医疗风险[J].医疗器械信息,2006,21(9):74-76. [9] McRoberts S. Risk Management of Product Safety[C]//IEEE. 2005IEEE Symposium on Product Safety Engineering. USA: IEEE. 2005:65-71. [10] 耿仁义,朱中林,华伟,等. 实用心脏起搏技术[M]. 北京:人民军医出版社,2003:57-64. [11] 孟杰雄,刘沫.FMEA 在危险分析中的使用和误用[J]. 中国医疗器械信息,2006,12(7):52-54. [12] International Electro-technical Commission. IEC 60812, Analysis techniques for system reliability-Procedure for failure mode and effects analysis(FMEA)[S/OL]. (2006-01-25)[2013-07-05].http://webstore.iec.ch/webstore/webstore.nsf/ArtNum_PK/35494!open-Document. [13] 李雪原,李铁玲.加强医疗器械管理降低医疗风险[J]. 医疗器械息,2006,21(9):74-76. [14] 沈成康. 断裂力学[M]. 上海:同济大学出版社,1996:308-311. [15] 祝效华,余志祥.ANSYS高级工程有限元分析范例精选[M]. 北京:电子工业出版社, 2004:19-24. [16] 欧阳昭连.在用医疗器械风险管理问题及对策研究[D]. 北京:中国医学科学院/中国协和医科大学医学信息研究所,2007. [17] Steven M.Donn.Medical liability,risk management,and the quality of health care[J]. Seminars in Fetal and Neonatal Medicine,2005,10(1):3-9. |