中国药物警戒 ›› 2016, Vol. 13 ›› Issue (1): 20-23.
肖晏婴,王洪军,邹如政,黄德红,刘敏,王勇
XIAO Yan-ying1, WANG Hong-jun1, ZHOU Ru-zhen2, HUANG De-hong1, LIU Min1, WANG Yong1
摘要: 目的 优选浓缩前列安丸的最佳干燥和成型工艺。方法 以浓缩比例、干燥温度、干燥时间和真空度为考察因素,以丹酚酸B 含量和水分评分作为考察指标, 采用正交实验优选浓缩前列安丸的干燥工艺。以推料速度、切丸速度、乙醇浓度和乙醇用量为考察因素, 以成型率评分和崩解时限评分为考察指标优化其成型工艺。结果 优化的最佳干燥工艺为浓缩比例为1:1.3, 干燥温度为65 ℃ , 干燥时间为60 min, 真空度为0.08 MPa。最佳成型工艺为乙醇浓度为80%, 切丸速度为30 rpm, 推料速度为30 rpm, 乙醇用量为10%。结论 优化后的工艺简便、易行、稳定, 可用于浓缩前列安丸的批量生产。
中图分类号: